This Electric Personal Watercraft with a Composite Hull is Almost Unsinkable

Slovenian firm Quadrofoil has released an improved version of its QS2 – a limited edition, two-seat, four-legged, electric personal watercraft. The watercraft has been in development for four years and was expected to debut last year, but had been delayed by continuous testing, reviewing, upgrading and fine-tuning of the original prototype. The foils almost act like wings, helping the watercraft glide on the surface of the water at 25 mph. Quadrofoil believes the QS2 is “almost unsinkable” due to its upgraded hull, which was constructed with composites. The watercraft incorporates glass-reinforced plastic (GRP) in its deck. The seats have gone from pure acrylonitrile butadiene styrene (ABS) to a combination of GRP and polyurethane for a better seating angle, as well as better neck support and comfort. According to New Atlas, Quadrofoil says it was inspired by trimaran speed boats, air fighters and race cars and designed the craft to be stable, to have good hydrodynamic and aerodynamic performance and to help with handling. It takes three to four hours to charge the watercraft, which has 80 km (50 mile) range. Its battery management system continuously monitors their usage and uses algorithms to optimize power delivery. Because it is environmentally-friendly, the Q2 can be used in places that gas-powered watercraft are not allowed. The company says it is ready for production and that deliveries of a Q2S limited edition version will begin in March 2017. Prices begin at €19,950 ($20,800). The Q2A will follow in early 2018. To check out the QS2 in action, check out the video below: [embed]https://youtu.be/h4IVh6ht9QY[/embed]

More from Composites Magazine

07 Aug 2017  |  Automotive, Industry Digest

Altair Awards Toyota for Innovative use of Composites

24 Jul 2017  |  Business, Industry Digest

CAMX Announces Speakers for its 2017 General Session

08 May 2017  |  Architecture, Industry Digest

ACMA Puts Emphasis on Composites in Architecture at AIA 2017

01 May 2017  |  Tech Talk

Listing and Labeling for IBC Approval

13 Mar 2017  |  Industry Digest, Marine

Decision SA Sells First Composite-Made Flying River Taxi

23 Jan 2017  |  Architecture, Industry Digest

Russian Orthodox Cathedral in Paris Features Composite Materials

12 Dec 2016  |  Energy, Industry Digest

Aliancys Provides Insight into Fiberglass Co-Processing

17 Oct 2016  |  Architecture, Industry Digest

MIT and Google Create Private Drop-Down Meeting Spaces with Fiberglass

27 Jun 2016  |  Energy, Industry Digest

European Manufacturers Develop World’s Longest Wind Turbine

23 May 2016  |  Industry Digest, Market Segments

EnvisionTEC Unveils First Disruptive Industrial Scale Composite 3D Printer

02 May 2016  |  Tech Talk

A Primer on Glass Fiber Reinforcements

18 Jan 2016  |  Industry Digest, Marine

Egypt to Build Underwater Museum with Fiberglass Tunnels

03 Nov 2015  |  Architecture, Industry Digest

FRP-Made San Francisco Museum of Modern Art (SFMOMA) Nears Completion

02 Nov 2015  |  Tech Talk

Proper Tooling Design Matters

02 Nov 2015  |  Aerospace, Industry Digest

Airlander 10 Gets Second Wind

26 Oct 2015  |  Energy, Industry Digest

Solar Decathlon Winning Design Gains Strength from Composites

12 Oct 2015  |  Automotive, Industry Digest

BMW Uses CFRP to Cut Weight From New M4 GTS

08 Sep 2015  |  Industry Digest, Infrastructure

Miami Students Replace Steel in “Fate Bridge” with GFRP

13 Jul 2015  |  Industry Digest, Military

Fiberglass Armor with Printed Electronic Antenna Completed

06 Jul 2015  |  Aerospace, Industry Digest

The First Mars Airplane will be made with Composites

16 Jan 2015  |  Industry Digest, Infrastructure

Composites Hit the Road to Replace Steel in Manhole Covers

09 Jan 2015  |  Industry Digest, Marine

This Fiberglass Boat Folds Away in Seconds

SUBSCRIBE TO CM MAGAZINE

Composites Manufacturing Magazine is the official publication of the American Composites Manufacturers Association. Subscribe to get a free annual subscription to Composites Manufacturing Magazine and receive composites industry insights you can’t get anywhere else.