World’s First Flying Vehicles are Being Made with Composites
February 20, 2017
All over the world, a handful of companies are creating what many have called the first wave of “real” flying vehicles. According to sources, many of these vehicles may be market-ready sooner than you think. Tech Times has reported that according to Mattar al-Tayer, chief of Dubai’s Roads and Transportation Agency, a passenger-carrying drone known as the EHang 184 could begin regular operations in Dubai by early as July this year. "This is not only a model. We have actually experimented with this vehicle flying in Dubai's skies," al-Tayer said. The EHang 184’s main frame is made with FRP composites of carbon fiber and epoxy. It weighs about 530 pounds. It uses eight motors with a maximum output of 152 KW and is designed to fly at a maximum altitude of roughly two miles. It also has a total maximum flight time of 30 minutes and a range of 31 miles. “The 184 AAV has embedded with EHang fail safe system. If any components malfunction or disconnect, the aircraft will immediately land in the nearest possible area to ensure safety. The communication is encrypted and each AAV has its independent key,” the company’s website says. In The Netherlands, another company has created what is being called the world’s first commercial flying car – the Pal-V One Liberty. The company recently announced the car’s on sale price - £425,000, with the first customer deliveries scheduled for the end of 2018. The Pal-V’s frame is made with a combination of carbon fiber, aluminum and titanium. In total, the flying car has a maximum takeoff weight of 2,006 lbs. It can reach a maximum speed of 100 mph and has an 817-mile range. It’s also relatively eco-friendly at 31miles per gallon. Finally, in the U.S., a Louisiana-based company, SkyRunner LLC, has created what it’s calling the world’s first flying off-road vehicle. The vehicle features a “hybrid composite chassis” consisting of carbon fiber body composites which work in tandem with air-hardened, heat-treated steel tubing. The chassis, according to SkyRunner, gives their vehicle a great strength-to-weight ratio. The vehicle’s Polaris ProStar 1000 engine powers the ground system while a light-sport aircraft engine enables it to take flight. It uses parafoil wing technology to reach air speeds of 40 mph for a distance of 120 nautical miles. "We set out to build the ultimate adventure vehicle but have since discovered it fills tremendous gaps as a tool," said SkyRunner CEO Stewart Hamel. "Designed initially as a toy, the market has translated SkyRunner to be a low cost, high utility multimodal tool for ranchers, law enforcement, border security, and even department of defense agencies. With operating costs of approximately $50 an hour, SkyRunner will take you places no pickup truck or UTV can go and at a fraction of the cost of a helicopter."
Your source for composite reinforcements and technical support
Vectorply combines highly engineered composite reinforcements with industry-leading engineering and technical support to give customers a clear path to achieve their production goals.
Meet the LSAM Additive Printer
A lower-cost “print only” line of machines built around proven LSAM technology
SHAPING THE FUTURE OF AEROSPACE
Advanced thermoplastic composite structures
More from Composites Magazine
23 Jul 2018 | Automotive, CM Magazine, Columns, Industry Digest
Magna Wins Big at SPE for Automotive Composite Innovation
02 Jul 2018 | CM Magazine, Columns, Industry Digest, Marine
Composites Will be Part of First Hydrogen Fuel Cell Boat in the United States
12 Mar 2018 | Automotive, CM Magazine, Columns, Industry Digest
2018 Geneva Motor Show Features European Debuts of New Composite-Intensive Models
12 Mar 2018 | CM Magazine, Columns, Industry Digest, Market Segments
FastRTM Project Successfully Demonstrates Rapid Manufacturing of Complex, Net Shape, Structural Composites
05 Mar 2018 | Aerospace, CM Magazine, Columns, Industry Digest
Airbus Debuts First Ultra Long Range A350 XWB Plane
20 Nov 2017 | Automotive, CM Magazine, Columns, Industry Digest
Composites from Polynt Used in Areas of First Road-Legal Dallara Vehicle
13 Nov 2017 | Automotive, CM Magazine, Columns, Industry Digest
Workhorse to Test N-Gen Electric Van with 100-Mile Range
07 Aug 2017 | Automotive, CM Magazine, Columns, Industry Digest
Altair Awards Toyota for Innovative use of Composites
24 Jul 2017 | CM Magazine, Columns, Industry Digest, Marine
Could Composites Help Save Coral in the Great Barrier Reef?
24 Jul 2017 | Business, CM Magazine, Columns, Industry Digest
CAMX Announces Speakers for its 2017 General Session
17 Jul 2017 | CM Magazine, Columns, Industry Digest, Infrastructure
Arizona DOT strengthens two Interstate 17 bridges in Phoenix with Composites
17 Jul 2017 | Automotive, CM Magazine, Columns, Industry Digest
McLaren Could Supply Carbon Chassis to Other Automakers
17 Jul 2017 | CM Magazine, Columns, Industry Digest, Infrastructure
Hyperloop One Completes World’s First Successful Hyperloop Full Systems Test
10 Jul 2017 | Automotive, CM Magazine, Columns, Industry Digest
Porsche Unveils its Most Powerful, Street-Legal 911 Model Ever
10 Jul 2017 | Aerospace, CM Magazine, Columns, Industry Digest
Eviation Aircraft to Develop All-Electric Commuter Aircraft with Composites
22 May 2017 | Aerospace, CM Magazine, Columns, Industry Digest
KalamSat, The World’s Lightest Satellite Will Show how CFRP Performs in Space
15 May 2017 | Automotive, CM Magazine, Columns, Industry Digest
Workhorse Unveils W-15 Electric Pickup Truck
15 May 2017 | CM Magazine, Columns, Energy, Industry Digest
Composite Recycling Technology Center to Reuse CFRP for Park Benches
15 May 2017 | CM Magazine, Columns, Industry Digest, Market Segments
Model One 3-D Printer from Impossible Objects Could Transform Manufacturing
15 May 2017 | Aerospace, CM Magazine, Columns, Industry Digest
Air Force X-37B Space Plane Returns to Earth
03 Apr 2017 | CM Magazine, Columns, Industry Digest, Military
Future Army Soldiers Could Have “Third Arm” to Carry Weapons
20 Mar 2017 | Architecture, CM Magazine, Columns, Industry Digest
Introducing PassivDom: An Autonomous 3-D printed Composite Solar-Powered House
13 Mar 2017 | CM Magazine, Columns, Industry Digest, Marine
Decision SA Sells First Composite-Made Flying River Taxi
13 Mar 2017 | Aerospace, CM Magazine, Columns, Industry Digest
Airbus and Italdesign Unveil Autonomous Flying Car Concept in Geneva
13 Mar 2017 | Automotive, CM Magazine, Columns, Industry Digest
Ford Tests 3-D Printing of Large Scale Car Parts
06 Mar 2017 | CM Magazine, Columns, Industry Digest, University
LLNL Researchers Become First to 3-D Print Aerospace-Grade Carbon Fiber
20 Feb 2017 | Aerospace, CM Magazine, Columns, Industry Digest
SpaceX Launches Falcon 9 Rocket from Historic NASA Launch Pad
20 Feb 2017 | Aerospace, CM Magazine, Columns, Industry Digest
Boeing Debuts 787-10 Dreamliner During Trump Visit
13 Feb 2017 | Aerospace, CM Magazine, Columns, Industry Digest
Boeing Space Taxi will Feature 600 3-D Printed Parts
13 Feb 2017 | CM Magazine, Columns, Industry Digest, Marine
World’s Tallest Superyacht, Made with Composites, Sets Sail
06 Feb 2017 | Aerospace, CM Magazine, Columns, Industry Digest
Airbus Creates First Single-Piece Composite Center Wing Box
30 Jan 2017 | Aerospace, CM Magazine, Columns, Industry Digest
Boeing Shares Reach Record High Thanks to Dreamliner
30 Jan 2017 | Architecture, CM Magazine, Columns, Industry Digest
Thermoplastic ICEhouse Stands out at 2017 World Economic Forum
30 Jan 2017 | Automotive, CM Magazine, Columns, Industry Digest
At 216 mph, Ford GT Becomes Fastest Ford Production Vehicle Ever
23 Jan 2017 | Architecture, CM Magazine, Columns, Industry Digest
Russian Orthodox Cathedral in Paris Features Composite Materials
23 Jan 2017 | CM Magazine, Columns, Industry Digest, Marine
Lexus Debuts Sport Yacht Concept with Carbon Fiber Composites
23 Jan 2017 | Automotive, CM Magazine, Columns, Industry Digest
Sustainable Vehicles among Composite Applications at CES 2017
19 Jan 2017 | Business, CM Magazine, Columns
Composites Executive Forum Highlights Recycling and Workforce Development
16 Jan 2017 | CM Magazine, Columns, Industry Digest, Sports & Recreation
CES 2017 Features Android Powered “Smart Bike” Made with Composites
16 Jan 2017 | Automotive, CM Magazine, Columns, Industry Digest
2017 Honda Ridgeline Wins Big at Detroit Auto Show
19 Dec 2016 | Architecture, CM Magazine, Columns, Industry Digest
ORNL’s Massive 3-D Printed Pavilion Wows Crowd at Design Miami
19 Dec 2016 | CM Magazine, Columns, Industry Digest, University
Scientists use Graphene Composites to Make Silly Putty Conduct Electricity
12 Dec 2016 | Aerospace, CM Magazine, Columns, Industry Digest
Boeing Starts Final Assembly of 787-10 Dreamliner
05 Dec 2016 | Aerospace, CM Magazine, Columns, Industry Digest
Researchers Create World’s First Reconfigurable Carbon Fiber Robotic Machine Tool
29 Nov 2016 | Aerospace, CM Magazine, Columns, Industry Digest
SpaceX Successfully Tests Carbon Fiber Tank for Mars Spaceship
29 Nov 2016 | CM Magazine, Columns, Industry Digest, Marine
Offshore Catamaran Goes from New York to Bermuda in 66 Hours
21 Nov 2016 | CM Magazine, Columns, Industry Digest, University
Green Process to Make Carbon Fiber for Rocket Nozzles Receives Patent
14 Nov 2016 | CM Magazine, Columns, Industry Digest, Infrastructure
Colorado State University Engineers Repair Steel Structures with Composites
14 Nov 2016 | Aerospace, CM Magazine, Columns, Industry Digest
MIT and NASA Design ‘Morphing” Aircraft Wings for Efficient Flight
07 Nov 2016 | CM Magazine, Columns, Industry Digest, University
Utah Researchers Look to Turn Coal into Carbon Fiber
07 Nov 2016 | Aerospace, CM Magazine, Columns, Industry Digest
NASA Completes Construction of Highly Anticipated James Webb Space Telescope
24 Oct 2016 | Aerospace, CM Magazine, Columns, Industry Digest
Boeing 777X GE9X Engine Completes Initial Ground Testing
17 Oct 2016 | Aerospace, CM Magazine, Columns, Industry Digest
World’s First Four-Seater Hydrogen Fuel Cell Plane Has First Flight
10 Oct 2016 | CM Magazine, Columns, Industry Digest, Marine
All-Composite Yacht “Galaxy of Happiness” Debuts in Monaco
26 Sep 2016 | Automotive, CM Magazine
Ford Technical Leader David Wagner: Composites “Poised for a Breakthrough”
19 Sep 2016 | CM Magazine, Columns, Industry Digest
Ingersoll and ORNL to Collaborate on Enormous 3-D Printer
19 Sep 2016 | Business, CM Magazine, Columns, Industry Digest
Teijin Acquires Continental Structural Plastics for $825 Million
08 Aug 2016 | Automotive, CM Magazine, Columns, Industry Digest
Briggs Automotive Company Develops World’s First Car Made with Graphene
01 Aug 2016 | Architecture, CM Magazine, Columns, Industry Digest
New Floating Carbon Fiber House Splits in Two after Divorce
01 Aug 2016 | CM Magazine, Columns, Industry Digest, Sports & Recreation
Cyclotron’s Carbon Fiber Bike Rides without Spokes or Wheels
18 Jul 2016 | Aerospace, CM Magazine, Columns, Industry Digest
Boeing to Make 777X Components with Composite Material from U.A.E.
18 Jul 2016 | CM Magazine, Columns, Industry Digest, Military
Three Parts of F-35 Will be Made Entirely with Composites
18 Jul 2016 | Automotive, CM Magazine, Columns, Industry Digest
Toyota and BMW Working on Next-Generation Supercars with Composites
18 Jul 2016 | Aerospace, CM Magazine, Columns, Industry Digest
Spirit AeroSystems Installing One of the World’s Largest Autoclaves for Composite Manufacturing
11 Jul 2016 | Aerospace, CM Magazine, Columns, Industry Digest
British Researchers to Test Carbon Fiber Satellite that Collects Space Debris
06 Jul 2016 | CM Magazine, Columns, Industry Digest, Sports & Recreation
Swiss Students Go 0-62 MPH in 1.51 Seconds in Record-Breaking Vehicle
06 Jul 2016 | Business, CM Magazine, Columns, Industry Digest
IACMI Partners with World’s First Carbon Fiber Recycling Facility for Product Development
06 Jul 2016 | Automotive, CM Magazine, Columns, Industry Digest
New Lamborghini Composites Center Experimenting with Revolutionary Carbon Fiber
06 Jul 2016 | Automotive, CM Magazine, Columns, Industry Digest
Quebec Students Set North American Fuel Efficiency Record at 3,788 MPG
27 Jun 2016 | Automotive, CM Magazine, Columns, Industry Digest
Local Motors Debuts “Olli” – a Self-Driving 3D-Printed Car
27 Jun 2016 | Aerospace, CM Magazine, Columns, Industry Digest
The X-57 – NASA’s First X-Plane in 10 Years – Will Fly Next Year
20 Jun 2016 | Aerospace, CM Magazine, Columns, Industry Digest
Solar-Powered Aircraft with Composites Has First Test Flight
20 Jun 2016 | CM Magazine, Columns, Energy, Industry Digest
Carbon Conversions Recycling Process Featured on Science Channel
20 Jun 2016 | Automotive, CM Magazine, Columns, Industry Digest
Mercedes-Benz Develops First Plug-in Hybrid Fuel Cell Car
13 Jun 2016 | Aerospace, CM Magazine, Columns, Industry Digest
Russia Unveils Potential Competitor to Airbus 320 and Boeing 737
13 Jun 2016 | Automotive, CM Magazine, Columns, Industry Digest
BMW Ramps up Investment in Driverless, Carbon Fiber-Based Electric Vehicles
06 Jun 2016 | CM Magazine, Columns, Industry Digest, University
Mantis Shrimp Inspires Next Generation of Composites
06 Jun 2016 | CM Magazine, Columns, Industry Digest, Marine
Rolls-Royce Develops Carbon Fiber Propulsion System for Benetti Mega-Yachts
31 May 2016 | Aerospace, CM Magazine, Columns, Industry Digest
Airbus Launches ACJ350 XWB: A Wide-Body Version of the A350
23 May 2016 | Automotive, CM Magazine, Columns, Industry Digest
Ford GT Becomes Second Ford Vehicle with Carbon Fiber Wheels
23 May 2016 | CM Magazine, Columns, Industry Digest, Market Segments
EnvisionTEC Unveils First Disruptive Industrial Scale Composite 3D Printer
16 May 2016 | CM Magazine, Columns, Industry Digest, University
MIT Students Use Composites to Build Human-Powered Aircraft
16 May 2016 | Automotive, CM Magazine, Columns, Industry Digest
Hydrogen Powered Car Made with Composites Debuts at London Auto Show
09 May 2016 | CM Magazine, Columns, Industry Digest, Military
Futuristic Army Aircraft with Composites Could Replace Black Hawk
02 May 2016 | Business, CM Magazine, Columns, Industry Digest
Virginia Could Add 5,000 CFRP Jobs Annually Over Next 15 Years
18 Apr 2016 | Aerospace, CM Magazine, Columns, Industry Digest
GE Beings Ground Testing for World’s Largest Commercial Aircraft Engine
18 Apr 2016 | Automotive, CM Magazine, Columns, Industry Digest
Toyota and Clemson Unveil Next-Generation Concept Vehicle
11 Apr 2016 | Architecture, CM Magazine, Columns, Industry Digest
Researchers Creating Flexible Shelter with Robotically Wound CFRP
04 Apr 2016 | Aerospace, CM Magazine, Columns, Industry Digest
Inspection Tool for Airbus Composite Airframe in High Demand
25 Jan 2016 | Architecture, CM Magazine, Columns, Industry Digest
Carbon Fiber Composites Protect Japanese Building from Earthquakes
18 Jan 2016 | Aerospace, CM Magazine, Columns, Industry Digest
Solar Impulse Team to Continue World Flight in April
11 Jan 2016 | CM Magazine, Columns, Industry Digest, Marine
Composites Make Personal Submarines More Common Than Ever
05 Jan 2016 | CM Magazine, Columns, Industry Digest
Disney Creates Carbon Fiber Robot that Can Climb up Walls
23 Nov 2015 | Automotive, CM Magazine, Columns, Industry Digest
2050 Motors Bulletproof, All-Carbon Fiber Electric Vehicle now in the US
16 Nov 2015 | CM Magazine, Columns, Industry Digest, Sports & Recreation
Chicago Cubs Wrigley Field to be Preserved with Composites from DowAksa
16 Nov 2015 | Automotive, CM Magazine, Columns, Industry Digest
Local Motors to Pre-Sell World’s First 3-D Printed Car Series in 2016
19 Oct 2015 | Aerospace, CM Magazine, Columns, Industry Digest
AMRC 3-D Printed Composite Drones on Display in London
12 Oct 2015 | Automotive, CM Magazine, Columns, Industry Digest
BMW Uses CFRP to Cut Weight From New M4 GTS
21 Sep 2015 | Automotive, CM Magazine, Columns, Industry Digest
LAPD to Test BMW’s Carbon Fiber i3 for 12 Months
14 Sep 2015 | CM Magazine, Columns, Energy, Industry Digest
Port of Port Angeles Moves Forward on Composite Recycling Technology Center
10 Aug 2015 | Aerospace, CM Magazine, Columns, Industry Digest
NASA Creating Biggest Composite Rocket Parts Ever for Mars Mission
20 Jul 2015 | Automotive, CM Magazine, Columns, Industry Digest
Ford Reinvents the Carbon Fiber Wheel for Shelby GT350R Mustang
13 Jul 2015 | CM Magazine, Columns, Industry Digest, University
3D Printing Used to Make Carbon Fiber Printing Robot
06 Jul 2015 | Aerospace, CM Magazine, Columns, Industry Digest
The First Mars Airplane will be made with Composites
27 Apr 2015 | Automotive, CM Magazine, Columns, Industry Digest
Could Carbon Fiber-Reinforced Gears Really Replace Metal in Cars?
20 Apr 2015 | CM Magazine, Columns, Industry Digest
Out-Of-Oven Self-Heating Carbon Nanotubes Heat Aerospace Composites with Less Energy
13 Apr 2015 | Aerospace, CM Magazine, Columns, Industry Digest
These Spiders Could Build Carbon Fiber Parts in Space
09 Jan 2015 | CM Magazine, Columns, Industry Digest, Marine
This Fiberglass Boat Folds Away in Seconds
24 Oct 2014 | Automotive, CM Magazine, Columns, Industry Digest
Carbon Fiber Prices Could Drop by As Much As 90 Percent
24 Oct 2014 | CM Magazine, Columns, Industry Digest, University
These Carbon Composites Shape-Shift in Response to Environmental Triggers
09 Oct 2014 | CM Magazine, Columns, Industry Digest, Sports & Recreation
Carbon Fiber Makes for More Comfortable Bike Seat
07 Aug 2014 | CM Magazine, Columns, Industry Digest, University
MIT Identifies Moisture as a Threat to Epoxy Adhesives
11 Apr 2014 | Automotive, CM Magazine, Columns, Industry Digest
Danish Startup Creates Carbon Fiber Chassis Without Special Equipment
03 Apr 2014 | CM Magazine, Columns, Industry Digest
Can Carbon Fiber Composites Be the Future Material for Shipping Containers?
SUBSCRIBE TO CM MAGAZINE
Composites Manufacturing Magazine is the official publication of the American Composites Manufacturers Association. Subscribe to get a free annual subscription to Composites Manufacturing Magazine and receive composites industry insights you can’t get anywhere else.