UMaine Developing Process to 3D Print Large Wind Blades
As the market for wind energy continues to grow, it becomes more important to be able to design and manufacture wind blades quickly and at reasonable costs. The development of molds and tools for large blades can take more than a year and cost more than $10 million. The University of Maine (UMaine) Advanced Structures and Composites Center is looking to change that paradigm by developing a 3D printing solution for fabricating large, segmented wind blade molds.
While working on the 3D printing project funded by a $2.8 million grant from the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy, the UMaine group will also work on a $4 million project with researchers at Oak Ridge National Laboratory (ORNL) to apply robotic deposition of continuous reinforcing fibers in wind blades. ORNL has developed a new process that reduces the cost and the time required to fabricate the molds by incorporating 3D printed heating elements allowing robotic deposition of continuous reinforcing fibers.
Siemens Gamesa and TPI Composites are also partnering on the project with hopes of transitioning to the 3D printing process. Other team members include Ingersoll Machine Tools who provided the 3D printer and Techmer PM, the cellulosic-thermoplastic feedstock compounder.
“Very large wind blade molds will be printed on the world’s largest polymer 3D printer located at the UMaine Composites Center using recyclable bio-based materials reinforced with wood,” said Habib Dagher, executive director of the Advanced Structures and Composites Center. “By combining cutting-edge 3D printing manufacturing with bio-based feedstocks, our team estimates that new blade development costs can be reduced by 25% to 50% and accelerated by at least 6 months. Molds produced using these materials can be ground up and reused in other molds, making them a more sustainable solution.”
“Oak Ridge National Laboratory will apply expertise in additive manufacturing, carbon fiber technology and materials science to advance the use of 3D printing in wind energy applications,” said ORNL’s Xin Sun, interim associate laboratory director for energy science and technology. “We look forward to collaborating with UMaine to optimize these clean energy technologies to benefit the environment and boost the economy.”
Vectorply combines highly engineered composite reinforcements with industry-leading engineering and technical support to give customers a clear path to achieve their production goals.
A lower-cost “print only” line of machines built around proven LSAM technology
Advanced thermoplastic composite structures